Print Friendly Version of this pagePrint Get a PDF version of this webpagePDF
Follow

iSTAR Handling Care

This imaging camera is a precision instrument. Do not drop it or subject it to physical shock.

  • Do not adjust or tamper with the camera lenses as this could result in damage and the lenses going out of focus. Care should be taken not to touch the camera lenses with your fingers. The lenses can be cleaned with the lens cloth provided.
  • iSTAR is not waterproof and cannot be used under water. If you accidentally drop the camera into water, promptly consult your Reseller. Wipe off any water droplets with a dry cloth.
  • Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor. Also avoid using or leaving the camera near anything emitting strong radio waves such as a large antenna. Strong magnetic fields can cause camera misoperation or destroy image data.
  • Do not expose the camera to excessive heat such as in a car in direct sunlight. High temperatures can cause the unit to malfunction.
  • iSTAR contains precision electronic circuitry. Never attempt to disassemble the camera yourself.
  • Use a blower to blow away dust on the lens and touch screen. Do not use cleaners that contain organic solvents to clean the camera’s body or lens. Do not breathe on the lens’s to clean them.
  • If the unit is suddenly brought in from the cold into a warm room, condensation may form on the lenses and internal parts. To prevent condensation, first put the camera in a sealed plastic bag and let it adjust to the warmer temperature before taking it out of the bag.
  • If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If this occurs, remove the SD card and battery from the camera, and wait until the condensation has evaporated before using the camera.
  • If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well ventilated location.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk